Product version
deTem4 A/P
Application
Normal industrial environment
Functional principle
Active/passive
Type of diversion
Fibre-optic deflection
Items supplied
Active unitSP1-1200 system plug for active unitPassive unitDMM4 extension moduleConnection cable (1 m) for active unit to DMM4, M12, 8-pin, straight, A-codedConnecting cable (20 m) for DMM4, flying leads, 8-wirePP4 device column (column height 1,710.5 mm)Muting arm kit for 2-sensor cross muting, pre-assembled and pre-adjusted muting sensors and reflectors, for mounting on both sides of PP4 device columnsFlexFix mounting kit for mounting the deTem4 A/P on PP4 device columnsAdjusting plate for fastening device columns to the floorSteel dowels for fastening the columns to the floorSafety instructionMounting instructionsOperating instructions for download
Safety integrity level
SIL 3 (IEC 61508)
Category
Category 4 (ISO 13849-1)
Performance level
PL e (ISO 13849-1)
PFHD(mean probability of a dangerous failure per hour)
6.6 x 10-9
TM(mission time)
20 years (ISO 13849-1)
Safe state in the event of a fault
At least one OSSD is in the OFF state.
Note
This muting set contains the equipment for the function package DMM4.The deTem4 A/P safety light-beam sensor can be used with different function packages. The function packages are determined by the equipment used.
Function package SP1
Protective operationBeam codingRestart interlockExternal device monitoring (EDM)Application diagnostic output (ADO)IO-LinkEquipment: Active unit with SP1 system plug
Function package SP2
Function package SP1 includedMuting (2-signal muting)Equipment: Active unit with SP2 system plug
Function package DMM4
Function package SP2 includedMuting (4-signal muting)Operating mode selectionInputs for safety sensors (SDI)Equipment: Active unit with SP1 system connector and DMM4 extension module
System connection
Male connector M12, 8-pin
Connection for active unit
Female connector M12, 8-pin
Connection for muting sensors
4 × M12 female connector, 5-pin
Device connections (X1, X2, X3)
3 × M12 male connector, 5-pin
Configuration connection
USB 2.0 Type-C
Configuration method
PC software via DMM4 (Safety Designer)
Alignment aid
Alignment quality via diagnostic LEDs
End cap with integrated LED
✔
Near Field Communication (NFC)
✔
Protection class
III (IEC 61140)1)
Supply voltage VS
24 V DC (19.2 V DC ... 28.8 V DC)2)
Output signal switching devices (OSSDs)
2 PNP semiconductors, short-circuit protected, cross-circuit monitored4)
ON state, switching voltage HIGH
24 V DC (VS– 2.25 V DC ... VS)
OFF state, switching voltage LOW
≤ 2 V DC
Current-carrying capacity per OSSD
≤ 500 mA
Application diagnostic output (ADO)
PNP semiconductor, short-circuit protected4)
Output voltage HIGH (active)
≥ Vs– 3 V
Output voltage LOW (deactivated)
High resistance
Dimensions
See dimensional drawing
Enclosure rating
IP65 (IEC 60529)IP67 (IEC 60529)
Ambient operating temperature
–30 °C ... +55 °C
Storage temperature
–30 °C ... +70 °C
Air humidity
15 % ... 95 %, Non-condensing
Vibration resistance
5 … 150 Hz, 3,5 mm / 1 g (EN 60068-2-6)
Shock resistance
15 g / 6 ms (EN 60068-2-27)
Class
3M4 (IEC TR 60721-4-3)
EMC
According to IEC 61496-1, IEC 61000-6-2, IEC 61000-6-4
Type of light
Near-infrared (NIR), invisible
