Incremental encoders | DFS60 | DFS60E-BDEC00S20 | Mechanical design: Blind hollow shaft 10 mm (Front clamp) | Communication interface: 10 V ... 32 V, HTL, Push pull | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 500 | Specialty: Customized Encoderflange, without standard stator coupling, customized stator coupling (spring wire), M3 screw and washer included in delivery (loose), customer specific clamping ring (hexagon socket screw)
Special device
✔
Specialty
Customized EncoderflangeWithout standard stator couplingCustomized stator coupling (spring wire), M3 screw and washer included in delivery (loose)Customer specific clamping ring (hexagon socket screw)
Standard reference device
DFS60E-BDEC00500, 1054332
Additional information
Ordering information for sales set DFS60E-BDEC sales set S20 (part number 1089692) consisting of the encoder 1084870 DFS60E-BDEC00S20 + connecting cable M23 socket, 10 m cable with flying leads (6032868)
MTTFD(mean time to dangerous failure)
300 years (EN ISO 13849-1)1)
Pulses per revolution
5001)
Measuring step
90°, electric/pulses per revolution
Measuring step deviation at non binary number of lines
± 0.2°
Error limits
± 0.3°
Communication interface
Incremental
Communication Interface detail
HTL / Push pull
Number of signal channels
6-channel
Initialization time
40 ms
Output frequency
≤ 300 kHz
Load current
≤ 30 mA
Power consumption
≤ 0.5 W (without load)
Connection type
Male connector, M12, 8-pin, radial
Supply voltage
10 ... 32 V
Reference signal, number
1
Reference signal, position
90°, electric, logically gated with A and B
Reverse polarity protection
✔
Short-circuit protection of the outputs
✔1)
Mechanical design
Blind hollow shaft
Shaft diameter
10 mmFront clamp
Kaal
+ 0.2 kg
Shaft material
Stainless steel
Flange material
Aluminum
Housing material
Aluminum die cast
Start up torque
0.8 Ncm (+20 °C)
Operating torque
0.6 Ncm (+20 °C)
Permissible movement static
± 0.3 mm (radial)± 0.5 mm (axial)
Permissible movement dynamic
± 0.1 mm (radial)± 0.2 mm (axial)
Operating speed
≤ 6,000 min⁻¹1)
Moment of inertia of the rotor
40 gcm²
Bearing lifetime
3.6 x 10^10 revolutions
Angular acceleration
≤ 500,000 rad/s²
EMC
According to EN 61000-6-2 and EN 61000-6-4
Enclosure rating
IP67, Housing side, male connector (IEC 60529)1)IP65, shaft side (IEC 60529)
Permissible relative humidity
90 % (Condensation not permitted)
Operating temperature range
0 °C ... +85 °C
Storage temperature range
–40 °C ... +100 °C, without package
Resistance to shocks
50 g, 6 ms (EN 60068-2-27)
Resistance to vibration
20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
EU declaration of conformity
✔
UK declaration of conformity
✔
ACMA declaration of conformity
✔
Moroccan declaration of conformity
✔
China RoHS
✔
cULus certificate
✔
Information according to Art. 3 of Data Act (Regulation EU 2023/2854)
✔
ECLASS 5.0
27270501
ECLASS 5.1.4
27270501
ECLASS 6.0
27270590
ECLASS 6.2
27270590
ECLASS 7.0
27270501
ECLASS 8.0
27270501
ECLASS 8.1
27270501
ECLASS 9.0
27270501
ECLASS 10.0
27270501
ECLASS 11.0
27270501
ECLASS 12.0
27270501
ETIM 5.0
EC001486
ETIM 6.0
EC001486
ETIM 7.0
EC001486
ETIM 8.0
EC001486
UNSPSC 16.0901
41112113
Lae alla teabeleht
Juhendid, CAD-mudelid, sertifikaadid ja muud materjalid on tootja veebisaidil:
Ava toote leht tootja veebisaidil
