Incremental encoders | DFS60 | DFS60B-TGPZ00S79 | Mechanical design: Through hollow shaft 14 mm (Front clamp) | Communication interface: 4.5 V ... 32 V, TTL, HTL, programmable | Connection type: Special version | Pulses per revolution: 1,024 | Specialty: Through hollow shaft Ø 14 mm, clamping at the back (B side), stator coupling 4071692 premounted, programmable, preprogrammed to HTL/push pull, Cable, 8-wire, universal length of 1.0 m with M23 plug at end of cable and customer-specific pin assignment, programmable via PGT-10-S-S03, preprogrammed to 1024 lines
Special device
✔
Specialty
Through hollow shaft Ø 14 mm, clamping at the back (B side)Stator coupling 4071692 premountedProgrammable, preprogrammed to HTL/push pullCable, 8-wire, universal length of 1.0 m with M23 plug at end of cable and customer-specific pin assignmentProgrammable via PGT-10-S-S03, preprogrammed to 1024 lines
Standard reference device
DFS60B-TGPK10000, 1036926
MTTFD(mean time to dangerous failure)
300 years (EN ISO 13849-1)1)
Pulses per revolution
1,0241)
Measuring step
90°, electric/pulses per revolution
Measuring step deviation at binary number of lines
± 0.008°
Error limits
± 0.05°
Communication interface
Incremental
Communication Interface detail
TTL / HTL
Factory setting
Factory setting: output level TTL
Number of signal channels
6-channel
Programmable/configurable
✔
Initialization time
32 ms, 30 ms1)
Output frequency
≤ 600 kHz
Load current
≤ 30 mA
Power consumption
≤ 0.7 W (without load)
Connection type
Special version
Connection type Detail
Cable, 8-wire, universal length of 1.0 m with M23 plug at end of cable and customer-specific pin assignment
Supply voltage
4.5 ... 32 V
Reference signal, number
1
Reference signal, position
90°, electric, logically gated with A and B
Reverse polarity protection
✔
Short-circuit protection of the outputs
✔1)2)
Mechanical design
Through hollow shaft
Shaft diameter
14 mmFront clamp
Kaal
+ 0.2 kg
Shaft material
Stainless steel
Flange material
Aluminum
Housing material
Aluminum die cast
Start up torque
0.8 Ncm (+20 °C)
Operating torque
0.6 Ncm (+20 °C)
Permissible movement static
± 0.3 mm (radial)± 0.5 mm (axial)
Permissible movement dynamic
± 0.1 mm (radial)± 0.2 mm (axial)
Operating speed
≤ 6,000 min⁻¹1)
Moment of inertia of the rotor
40 gcm²
Bearing lifetime
3.6 x 10^10 revolutions
Angular acceleration
≤ 500,000 rad/s²
EMC
According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating
IP65, Housing side, male connector (IEC 60529)1)IP65, shaft side (IEC 60529)
Permissible relative humidity
90 % (Condensation not permitted)
Operating temperature range
–40 °C ... +100 °C2)–30 °C ... +100 °C3)
Storage temperature range
–40 °C ... +100 °C, without package
Resistance to shocks
70 g, 6 ms (EN 60068-2-27)
Resistance to vibration
30 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
ECLASS 5.0
27270501
ECLASS 5.1.4
27270501
ECLASS 6.0
27270590
ECLASS 6.2
27270590
ECLASS 7.0
27270501
ECLASS 8.0
27270501
ECLASS 8.1
27270501
ECLASS 9.0
27270501
ECLASS 10.0
27270501
ECLASS 11.0
27270501
ECLASS 12.0
27270501
ETIM 5.0
EC001486
ETIM 6.0
EC001486
ETIM 7.0
EC001486
ETIM 8.0
EC001486
UNSPSC 16.0901
41112113
Lae alla teabeleht
Juhendid, CAD-mudelid, sertifikaadid ja muud materjalid on tootja veebisaidil:
Ava toote leht tootja veebisaidil
