Photoelectric sensors | W2 | WS/WE2F-P120S05 | Functional principle: Through-beam photoelectric sensor | Switching output: PNP | Switching mode: Light switching | Connection type: Cable with M8 male connector, 4-pin, 300 mm | Light source: LED | Adjustment: None | Communication interface: -
Functional principle
Through-beam photoelectric sensor
Dimensions (W x H x D)
12 mm x 20 mm x 3.5 mm
Housing design (light emission)
Rectangular
Sensing range max.
0 m ... 0.5 m
Sensing range
0 m ... 0.4 m
Type of light
Visible red light
Light source
LED1)
Light spot size (distance)
Ø 10 mm (100 mm)
Wave length
660 nm
Adjustment
None
Supply voltage UB
12 V DC ... 24 V DC1)
Ripple
< 5 Vpp2)
Switching output
PNP
Switching mode
Light switching
Signal voltage PNP HIGH/LOW
Approx. VS– 1.8 V / 0 V
Signal voltage NPN HIGH/LOW
Approx. VS/ < 1.8 V
Output current Imax.
≤ 50 mA
Response time
≤ 0.5 ms3)
Switching frequency
1,000 Hz4)
Connection type
Cable with M8 male connector, 4-pin, 300 mm5)
Cable material
Plastic, PVC
Cable diameter
Ø 2.4 mm
Circuit protection
A6)C7)D8)
Weight
20 g
Special device
✔
Reverse polarity protection
✔
Short-circuit protection
✔
Housing material
Plastic, PC
Optics material
Plastic, PC
Enclosure rating
IP67
Ambient operating temperature
–20 °C ... +55 °C
Ambient temperature, storage
–40 °C ... +75 °C
ECLASS 5.0
27270901
ECLASS 5.1.4
27270901
ECLASS 6.0
27270901
ECLASS 6.2
27270901
ECLASS 7.0
27270901
ECLASS 8.0
27270901
ECLASS 8.1
27270901
ECLASS 9.0
27270901
ECLASS 10.0
27270901
ECLASS 11.0
27270901
ECLASS 12.0
27270901
ETIM 5.0
EC002716
ETIM 6.0
EC002716
ETIM 7.0
EC002716
ETIM 8.0
EC002716
UNSPSC 16.0901
39121528
Download Datasheet
Manuals, CAD models, certificates and other materials are available on the manufacturer's website:
Open product page on manufacturer's website
